Your iPhone screen is one of the most significant parts of your phone. If it becomes damaged, it can be difficult to use your phone correctly. Worse, you may end up dealing with expensive repairs. However, if you know how to fix your iPhone screen, you can save yourself a lot of money and hassle.
1. Remove the Screen
Before starting to fix your iPhone screen, you must remove the screen. You can use a special tool to pry the screen off the phone. If you do not have the tool, you can use a guitar pick or a thin piece of metal.
Once the screen is off, you can start to fix the broken screen. If the screen is completely shattered, you will need to replace it. If there are only a few cracks, you may be able to fix them yourself.
2. Apply Tape to the Screen to Enclose It
If you need to attach a suction cup to your iPhone screen, you can use packaging tape to help you out. All you need to do is cover the screen with packaging tape and attach the suction cup to the tape. Make sure the suction cup is securely attached to the screen, and then you can use it to stick to any surface.
3. Install a Suction Cup to the Screen
Once the tape is enclosed to the screen, you can install the suction cup. To do this, ensure the suction cup is clean and free of debris. Apply it to the centre of the taped area, and then press down on it until it is secure. You might need to apply a bit of pressure to ensure it sticks.
4. Add a Pry Tool
After the suction cup is in place, the pry tool comes into the picture. This is a thin, metal tool you will use to lift the screen off the device to fix your iPhone screen. Place the tool at the edge of the suction cup and then apply pressure to it.
You should be able to lift the screen off of the device relatively easily. If it is sticking, you can use the tool to apply more pressure until it comes loose.
5. Pry the Edge Completely With the Pry Tool
When the pry tool is in position, you can then use it to open the phone slowly. Avoid applying too much pressure to prevent damaging the equipment. You can remove the adhesive and the suction cup if the phone is open.
6. Lift the Screen
Hold the bottom of your phone gently and lift the screen. You may need to use a little force to get it to come off. If the adhesive still holds the screen, you can use the pry tool to help remove it.
Now that the screen is off, you can clean it using a microfiber cloth. Be sure to remove any adhesive or dirt on the screen.
Final Thoughts
iPhone screens can be fixed using the tips mentioned in the article. However, it is important to be careful while fixing the screen and using the right tools. The process is not complex and can be done by anyone. Following these steps can save the cost of a new phone or a repair bill.
TechXS provides a reliable and high-quality repair kit for iPhones, so you can easily fix your iPhone screen. Repair your screen with us today!