This troubleshooting guide will explore possible issues you may be experiencing with the front camera, proximity sensor, ambient light sensor (auto-brightness) or ear speaker after the installation of your new iPhone 6 Screen.
Our D-I-Y repair iPhone screens come with the above listed hardware pre-installed onto the screen by our warehouse Technicians. This module is installed in an effort to reduce both the complexity of the repair as well as the time taken to complete it.
If you are having trouble with any of the below listed functions after the installation of your new TechXS iPhone screen, these pre-installed modules (called the 'Front Camera Module' and 'Ear Speaker Module') may be the cause:
- Front Camera function
- Proximity Sensor function (locking the screen while you speak on the phone)
- Ambient Light Sensor function (auto-brightness feature)
- Front facing microphone
- Ear Speaker function (Note: also replace the Ear Speaker Module)
This guide has been created to instruct how to replace the Front Camera Module without too much trouble. It provides the steps to replacing the pre-installed module with the module from your existing screen.
Replacing the Front Camera Module
First, complete steps 1-5 of the Screen Repair Guide to disconnect your screen. Note you do not need to remove your home button at all during this repair.
Next, replace the Front Camera Module using our 3 minute step-by-step video guide below.
Note you are using this guide to remove the Front Camera Module from your old screen, and replace it with the module installed on the new TechXS screen.
If you are using this guide to fix an Ear Speaker function, then also replace this module at the same time.
Finally, follow steps 8-10 (11:53) of the Screen Repair Guide to re-connect your new screen.
Once the new Front Camera Module is installed and you have powered on the device, try testing the function to see if it has fixed your problem.
Please note that this component is covered under your TechXS Warranty. If you would prefer to receive an exchange please let our support team know.
If any issues persist after you have replaced the Front Camera Module, please contact our support team to continue to troubleshoot the problem.